Silicone Mold No. 231 – Figure Skater

Made to order. Estimated lead time: 3 weeks.

• Length: up to 9.2 cm.
• Width: up to 5.5 cm.
• Pour depth: up to 6 mm, which is 2 mm shallower than the previous series.
• Resin required: approximately 8 g.
• Design by @x.stitching in collaboration with the author of the Telegram channel @smolaepoxyresin.
• We recommend using a low-viscosity resin for casting.
• Glossy surface.
• Made from high-strength platinum-cure silicone.